home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!mcsun!news.funet.fi!hydra!klaava!jliukkon
- From: jliukkon@klaava.Helsinki.FI (Juha-Matti Liukkonen)
- Newsgroups: comp.sys.ibm.pc.hardware
- Subject: Re: Connor CP-3044 as D:
- Message-ID: <1992Sep12.151340.28125@klaava.Helsinki.FI>
- Date: 12 Sep 92 15:13:40 GMT
- References: <d8olsth.716280564@dtek.chalmers.se>
- Organization: University of Helsinki
- Lines: 16
-
- In <d8olsth.716280564@dtek.chalmers.se> d8olsth@dtek.chalmers.se (Thomas Olsson) writes:
-
- >Does anybody no how to configure a Connor CP-3044 as a secondary drive?
-
- Just hook it up to the same cable you have your master drive in, remove
- all the jumpers (ACT, C/D, DSP) from the Conner, and dip your master
- drive to be master (it probably is a single now).
-
- BTW, I just fixed my motherboard's bus speed up to 12.5 MHz and used
- Norton's Calibrate with rigorous patterns. Now the 3044 reportedly has
- an average seek of 18.83 ms! Not bad for a 25 ms drive, eh :)
-
- --
- Juha Liukkonen, aka jliukkon@cc.helsinki.fi
- University of Helsinki, Dept. of Paranormal Investigations
- "Trust me, I know what I'm doing." - Sledge Hammer
-