home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!spool.mu.edu!carroll1!acct069
- From: acct069@carroll1.cc.edu (Ron)
- Newsgroups: comp.sys.apple2
- Subject: SSC - //e - High Speed Modem - ProTERM question
- Message-ID: <3310@carroll1.cc.edu>
- Date: 13 Sep 92 18:26:15 GMT
- Reply-To: acct069@carroll1.cc.edu (Ron)
- Organization: Lightning Systems, Inc.
- Lines: 24
-
- I've been having a little bit of trouble with my set up, and am wondering
- if anyone else is having the same problems. I've been in contact with the
- author of ProTERM v3.0 about this, and would like to comfirm that this
- isn't just my problem before persuing it further.
-
- I'm looking for people that are running a high speed modem ( >9600 ) and a
- Super Serial Card with ProTERM v3.0.
-
- What I'd like to know is if you are having trouble with Zmodem sends to a
- remote system at a transfer rate faster than 9600 bps. (Hardware flow
- control is needed for this operation)
-
- The problem I'm seeing is that I get errors in the transfer when the CTS
- light flashes.
-
- Greg Schaefer explains the problem as a 6551 problem. He says that when
- the CTS line goes low, the 6551 chip stops transmitting data, even if it's
- in the middle of a character!
-
- Anyone else having trouble?
- --
- Ron | Lightning Systems, INC. | Apple // Forever!
- acct069@carroll1.cc.edu | (414) 363-4282 62megs | Van Halen Rules!
- carroll1!acct069@uwm.edu | 14.4k HST/V.32bis | Bill & Ted are cool!
-