home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #20 / NN_1992_20.iso / spool / comp / sys / apollo / 3511 < prev    next >
Encoding:
Internet Message Format  |  1992-09-09  |  2.2 KB

  1. Path: sparky!uunet!usc!hacgate!solaria!bill
  2. From: bill@solaria (Bill Neisius)
  3. Newsgroups: comp.sys.apollo
  4. Subject: Re: rz/sz doesn't work on our machines
  5. Message-ID: <23235@hacgate.SCG.HAC.COM>
  6. Date: 9 Sep 92 19:44:38 GMT
  7. References: <1992Sep8.181202.2287@digi.lonestar.org>
  8. Sender: news@hacgate.SCG.HAC.COM
  9. Reply-To: bill@solaria.hac.com
  10. Lines: 32
  11. X-Newsreader: Tin 1.1 PL5
  12.  
  13. Kevin Gallagher (kgallagh@digi.lonestar.org) wrote:
  14. : In article <1992Sep04.184127.17533@edsi.plexus.COM> chuck@edsi.plexus.COM (Chuck Tomasi) writes:
  15. : I compiled the rz/sz sources under Domain/OS 10.3.0.8 on a DN3550 in SYSTYPE
  16. : bsd4.3.  I connect from my PC at home to my Apollo through a DECserver to a
  17. : VAX (running VMS) and from the VAX to the Apollo via telnet.  The connection
  18. : turns out to be very robust.  The modem runs at 2400 baud.  On the PC, I use
  19. : Crosstalk Mk.4, the latest version,  using the build-in implementation of
  20. : ZMODEM. 
  21. : I can upload files from my Apollo node to my PC by invoking the sz command at
  22. : the Unix shell prompt.  The transfer rate is outstanding at around 232
  23. : characters per second.  However, I can't get the rz command to download files
  24. : from my PC to my Apollo.  I do suspect the ZMODEM implementation in Crosstalk
  25. : is, at least, partially at fault, but I can't be sure.  The version of Kermit
  26. : we have installed doesn't handle downloads to the Apollo as well as it handles
  27. : uploads.  We have to use smaller packets when downloading than when uploading,
  28. : and download failures happen often.  So it is possible that there is something
  29. : about the Apollo that causes problems here.
  30.  
  31. I also connect my PC through a VAX to my Apollo.  However, I found that
  32. the only way I could send files from the Apollo to the PC was to use
  33. the '-e' (escape control characters) option. I assume that without it
  34. the VAX in the middle is XOFF'd and communication is blocked.  Unfortunately,
  35. although the GSZ I use on the PC can receive escaped control characters,
  36. it doesn't seem to be able to send them... transferring a file from PC
  37. to Apollo requires storing it on the VAX then ftp'ing to Apollo...
  38.  
  39. So how are you able to get 232 cps?  Best I get (with the '-e' option)
  40. is about 180 cps...
  41.  
  42. Bill Neisius
  43. bill@solaria.hac.com
  44.