home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!news.centerline.com!noc.near.net!hri.com!ukma!cs.widener.edu!dsinc!bagate!cbmvax!spence
- From: spence@cbmvax.commodore.com (Spencer Shanson)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: AA Features
- Message-ID: <35143@cbmvax.commodore.com>
- Date: 15 Sep 92 21:55:35 GMT
- Organization: Commodore, West Chester, PA
- Lines: 30
-
- In article <JESMITH.92Sep15085442@flogger.gdfwc3> jesmith@gdfwc3 (Jesse Smith) writes:
- >I noticed in the news posted from WOC that AmigaDOS 2.1 supports an
- >800x600 mode with ECS, with an appropriate multisync monitor.
- >I'm assuming here that it must be the "Super72" monitor referred to
- >in your posting. What kind of monitor/setup does it take to make this
- >work?
-
- The Super72 will work with any monitor that can handle a 72Hz vertical and
- 24kHz horizontal refresh. You will also need an ECS agnus and ECS denise (or AA
- of course :-)
-
- >
- >BTW, my A3000/25 with a NEC Multisync 3DS does not seem to work using
- >any of the Super72 modes, but perhaps I'm doing something wrong.
-
- I don't think the NEC handles the Super72 rate - check the monitor specs.
-
- >
- >Thanks,
- >Jesse Smith
- >smith@riogrande.cs.tcu.edu
-
-
- --
- ---------------------------------------------------------------------------
- Spencer Shanson - Amiga Software Engineer | email: spence@commodore.COM
- | or uunet!cbmvax!spence
- All opinions expressed are my own, and do not | Bix: sshanson
- (necessarily) represent those of Commodore. | "Copper? I hardly even
- | know her!"
-