home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!spool.mu.edu!sdd.hp.com!elroy.jpl.nasa.gov!nntp-server.caltech.edu!jsurace
- From: jsurace@cco.caltech.edu (Jason A. Surace)
- Subject: Quantum 105LPS scsi jumpers
- Message-ID: <1992Sep14.184608.13154@cco.caltech.edu>
- Summary: How do I set the jumpers?
- Keywords: drive quantum
- Sender: news@cco.caltech.edu
- Nntp-Posting-Host: punisher
- Organization: California Institute of Technology, Pasadena
- Date: Mon, 14 Sep 1992 18:46:08 GMT
- Lines: 17
-
-
- I just bought a quantum 105lps which will be the second hard drive in my
- A3000. It didn't come with any instructions. What I want to know is,
-
- 1)Which jumpers set the scsi id#? Also, there are two sets of three jumpers each. What do all the jumpers do?
-
- 2)Do I remove the old drive's terminators and leave them in the new drive?
- I assume the terminators are the black, vertical plug-in packages directly
- behind the interface socket. (like lots of resistors stood on end and coated
- with epoxy).
-
-
- - Jason Surace
- jason@ipac.caltech.edu
- jsurace@cco.caltech.edu
-
-
-