home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.graphics
- Path: sparky!uunet!munnari.oz.au!uniwa!cujo!amuser
- From: amuser@cs.curtin.edu.au (Bill Sharp-Smith AUG)
- Subject: Re: OpalVision output?
- Message-ID: <amuser.716451526@marsh>
- Sender: news@cujo.curtin.edu.au (News Manager)
- Organization: Curtin University of Technology
- References: <1992Sep10.143809.27764@tc.cornell.edu>
- Date: Mon, 14 Sep 1992 06:18:46 GMT
- Lines: 25
-
- Vince@alchemy.tn.cornell.edu (Vince Koh Kia Keng) writes:
-
- >Just a quick question about Opalvision:
- >I know it is suppossed to support 15.75Khz scan rate. Does this mean that
- >I can use it on a standard Amiga monitor? (I actually have an Amiga 1081,
- >240V AC monitor that I brought over from Singapore.)
-
- Yes, I would say so. I saw it on a TV RGB input, and the 108x monitors
- have this input as well. The scan rate is also identical to a normal
- Amiga without the new modes.
-
- >Thank-you.
-
- >-Vince
-
- No worries
-
- --
- ________________________________________________________________________
- /[ /~7 / / /~~ / / /~7 | Email: amuser@marsh.cs.curtin.edu.au ]
- [ / 7 /_/ /_7 //l/ / 7 | By post: PO Box 595, Cloverdale,W. Aust 6105 ]
- [ Amiga Users Group of | ]
- [ Western Australia Inc | Opinions expressed are my own etc... ]
- [_______________________________________________________________________]
- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
-