home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.3b1
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!cbnewsk!ksc
- From: ksc@cbnewsk.cb.att.com (kenneth.s.cobler)
- Subject: Re: Help with EIA Combo board... What is cmbpcnt?
- Organization: AT&T
- Distribution: na
- Date: Tue, 15 Sep 1992 23:48:47 GMT
- Message-ID: <1992Sep15.234847.26209@cbnewsk.cb.att.com>
- References: <1992Sep11.114807.1@orion.yorku.ca>
- Lines: 21
-
- In article <1992Sep11.114807.1@orion.yorku.ca> haroldt@orion.yorku.ca writes:
- >
- >However... The software that came with the board for driving
- >the additional two serial ports does not work. It reaches
- >as far as the line (see /etc/lddrv/cmb.rc):
-
- >
- >
- >The above does not return within 5 minutes (I think it's hung).
-
- The cmbpcnt program counts the number of combo ports in the system.
- It also can be used to test for the existence of a single port.
-
-
- The 3.5 combo driver was a little buggy. Upgrade to 3.51m. The
- drivers in 3.51m should clear up your problem.
-
- Kenneth Cobler ksc@cbnewsk.att.com or ken@ihlpm.att.com
- AT&T Bell Laboratories attmail!cbnewsk!ksc or attmail!ihlpm!ken
- 2000 N. Naperville Rd.
- Naperville, IL 60566
-