home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!pipex!warwick!uknet!bcc.ac.uk!link-1.ts.bcc.ac.uk!ccaajmf
- From: ccaajmf@ucl.ac.uk (John Franks)
- Newsgroups: comp.protocols.tcp-ip.ibmpc
- Subject: Re: NCSA Telnet & WINPKT
- Message-ID: <1992Sep07.160606.4769@bas-a.bcc.ac.uk>
- Date: 7 Sep 92 16:06:06 GMT
- References: <1992Sep4.184222.280@news.uiowa.edu>
- Sender: news@ucl.ac.uk (Usenet News System)
- Organization: Bloomsbury Computing Consortium, London
- Lines: 22
-
- In article <1992Sep4.184222.280@news.uiowa.edu> boyken@herky.cs.uiowa.edu (Karl Boyken) writes:
- >I've set up a number of PCs with NCSA Telnet and Windows, using WINPKT.
- >For the packet driver, I always use 0x62 for the packet interrupt, then use
- >
- > winpkt 0x60 0x62
- >
- >to start WINPKT. WINPKT says that it finds the packet driver and that the
- >new interrupt is 0x60. I configure the config.tel thus:
- ... etc.
-
- I could be very wrong (I'm currently setting something up along these lines -
- please tell me if I am!) but I thought winpkt was only for windows programs
- and that DOS ones running under windows used the standard pktdrv interface -
- and you just don't run more than one on each pktdrv.
-
- Please, please reassure me!
-
-
- John Franks I will arise and go now, for always night and day
- ccaajmf@ucl.ac.uk I hear lake water lapping with low sounds by the shore;
- & jmf14@phx.cam.ac.uk While I stand on the roadway, or on the pavments grey,
- from Cambridge only I hear it in the deep heart's core.
-