home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.os.os2.misc:29661 comp.os.os2.apps:5996
- Path: sparky!uunet!bcstec!gregory
- From: gregory@bcstec.ca.boeing.com (Greg Wright)
- Newsgroups: comp.os.os2.misc,comp.os.os2.apps
- Subject: Re: MathCAD 3.1 under Win-OS2
- Message-ID: <3585@bcstec.ca.boeing.com>
- Date: 9 Sep 92 19:29:32 GMT
- References: <1992Sep06.122737.7362@stratsft.uucp> <RUGGIERO.92Sep8204536@antwrp.antwrp.gsfc.nasa.gov>
- Followup-To: comp.os.os2.misc
- Organization: Boeing
- Lines: 29
-
- In article <RUGGIERO.92Sep8204536@antwrp.antwrp.gsfc.nasa.gov> ruggiero@antwrp.antwrp.gsfc.nasa.gov (Knic) writes:
- >I've had the same problem someone give us a clue.....
- >
- > Knic
- There seem to be conflicting reports on MathCAD 3.1 under Win/OS2. Myself,
- I can run it only once. If I exit it and try to load it again it issues the
- famous "Not enough mem. Try closing some Windows apps....." The only way to
- get it to load again is to reboot. I have also noticed that certain other
- Windows apps which run fine by themselves will leave the system in a condition
- that will not allow MathCAD to startup. Other people I have talked to reported
- having no trouble at all. Still others, like yourselves, can't get it to load
- at all.
- In all three cases the people have set the following Win/OS2 settings:
-
- DPMI limit to >64
- XMS limit to 0
- EMS limit to 0.
-
- This is the place to start.......
-
- Good luck,
-
-
-
- --
- ________Greg Wright____________ "I struggle to be brief
- | gregory@bcstec.ca.boeing.com | and become obscure."
- | gregory@halcyon.com |
- |____uunet!bcstec!gregory_______| NOT A BOEING SPOKESPERSON.
-