home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.sys.cisco
- Path: sparky!uunet!cis.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!agate!boulder!recnews
- From: Jim O'Shea <jwo@hpuerca.atl.hp.com>
- Subject: MGS "hangs" on reload
- Message-ID: <9209082148.AA02962@hpfcla.fc.hp.com>
- Mailer: Elm [revision: 64.9]
- Sender: news@colorado.edu
- Date: 8 Sep 92 17:50:15 EDT
- Lines: 28
-
-
- I have been working on a problem where a MGS appears to hang if a reload
- command is issued. It is NOT NETBOOTING. A Power OFF/ON resolves this
- every time. From the data we have been able to gather is that the LED on
- the front of the chassis is out (however, our source isn't 100% reliable).
-
- There was not a modem or terminal connected to the console port to further
- aid verification of the state or gather any messages that might have helped.
- There will be for the next time, I was however, hoping for some thoughts
- as to what the problem might be. It operates just fine (once it is booted).
-
- The boards in system are:
-
- GS3-BF
- 8.2(5)
-
- slot1 - empty
- slot2 - CSC/3
- slot3 - CSC-2E
- slot4 - CSC-2E
-
- Any ideas are welcome. Thanks
-
-
- --
- Jim O'Shea
- jwo@hpuerca.atl.hp.com
- 404 850-2675
-