home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.sysv386
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!cs.utexas.edu!sun-barr!ames!haven.umd.edu!darwin.sura.net!mips!news.cs.indiana.edu!syscon!gator!dlpinc00!dlparker
- From: dlparker@dlpinc00.rn.com (David L. Parker)
- Subject: Re: FAS 2.10 (not a flame)
- Message-ID: <1992Aug27.105308.6939@dlpinc00.rn.com>
- Organization: Automated Data Management Services
- References: <winslade.714315167@cwis> <JOCHEN.92Aug24104916@mrz.sub.org> <1992Aug27.021105.1524@iisat.alt.ns.ca>
- Date: Thu, 27 Aug 1992 10:53:08 GMT
- Lines: 12
-
- In article <1992Aug27.021105.1524@iisat.alt.ns.ca> kevin@iisat.alt.ns.ca (Kevin Davies) writes:
- >
- >I'm using Taylor-UUCP 1.3 on SCO Xenix/386, with the FAS 2.10 drivers
- >without problems. The serial port (stock 16450) is locked at 38400
- >to a Worldblazer. Everything was also working with FAS 2.09.00.
- >
-
- Where can I get Taylor-UUCP 1.3 via (V.32bis) dial-up?
- --
- Dave Parker
- Automated Data Management Services, Pleasant Hill, MO 64080-1331
- (816) 987-5167/5218 voice/fax
-