home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.aux
- Path: sparky!uunet!haven.umd.edu!darwin.sura.net!Sirius.dfn.de!news.DKRZ-Hamburg.DE!regen.DKRZ-Hamburg.DE!m211037
- From: m211037@regen.DKRZ-Hamburg.DE (Martin Heimann)
- Subject: thre A/UX 3.0 questions from a beginner...
- Message-ID: <1992Sep3.103323.23408@news.DKRZ-Hamburg.DE>
- Sender: m211037@regen (Martin Heimann)
- Organization: Deutsches Klimarechenzentrum GmbH, Hamburg
- Date: Thu, 3 Sep 92 10:33:23 GMT
- Lines: 36
-
- Dear colleagues:
-
- After having installed A/UX 3.0 on my Quadra-900 system, I have
- encountered the following not necessarily related problems. I am not a
- unix-crack and have only followed the rather terse installation manual.
- I'd appreciate any hints that might help me resolve these problems.
-
- 1. How do I mount nfs volumes from other sun systems that are in our
- network? I get always the msg "unsupported file system type".
- The entry on that remote machine in the /etc/fstab file for the filesystem
- contains e.g. "/usr/local 4.2 rw 1 2" - is this a wrong file type for my
- A/UX system? I should add, that my machine is listed in the remote hosts
- /etc/exports file.
-
- 2. Where can one find a description of the errorcodes that might
- occur when running a fortran program, as e.g. "Exit 16"?
-
- 3. I'm using MacX to access the other unix and cray systems. How come
- that I can launch on my quadra all the x gadgets like xcalc but not xterm?
- I always get the message "xterm: no available ptys"?
-
- Martin Heimann
- --
- ----------------------------------------------------------------------
- "If you fail to prepare - prepare to fail"
-
-
- Martin Heimann
- Max-Planck-Institut fuer Meteorologie
- Bundesstrasse 55
- D-2000 Hamburg 13
- Germany
-
- phone: +49 40 41173 240
- fax: +49 40 41173 298
- email: heimann@dkrz-hamburg.dbp.de
-