home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!ogicse!uwm.edu!zaphod.mps.ohio-state.edu!darwin.sura.net!eng.ufl.edu!wonderhog.eng.ufl.edu!kent
- From: kent@wonderhog.eng.ufl.edu (Kent Phelps)
- Newsgroups: comp.sys.zenith
- Subject: Re: 286LP *Hates* my New Conner 120Mb IDE Drive
- Message-ID: <1992Sep4.170445.18157@eng.ufl.edu>
- Date: 4 Sep 92 17:04:45 GMT
- Article-I.D.: eng.1992Sep4.170445.18157
- References: <mr.715587800@ogre>
- Sender: news@eng.ufl.edu (Usenet Diskhog System)
- Reply-To: kent@wonderhog.eng.ufl.edu (Kent Phelps)
- Organization: University of Florida, Digital Design Facility
- Lines: 12
-
- There are two different IDE PAL's for the 286lp. I believe it U305. The
- chip has a ZDS part number screened right on it. The old one is 444-xxxx-00,
- the new one is 444-xxxx-01. I am sorry I can't remember what the xxxx is but
- you can look inside your machine to find out. You also may have to change
- the position of J303.
-
- Good Luck
- --
- Kent Phelps | Internet: kent@eng.ufl.edu
- Digital Design Facility | Phone: 904-392-2464
- "We will vote for a gerbil if necessary to get rid of George Bush and Dan Quayle
- Ms. Magazine
-