home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #19 / NN_1992_19.iso / spool / comp / sys / mentor / 200 < prev    next >
Encoding:
Internet Message Format  |  1992-08-25  |  1.1 KB

  1. Path: sparky!uunet!gatech!purdue!mentor.cc.purdue.edu!noose.ecn.purdue.edu!samsung!balrog!ctron.com!baker
  2. From: baker@ctron.com (Lauren Baker)
  3. Newsgroups: comp.sys.mentor
  4. Subject: Re: using LAI models with 8.1
  5. Message-ID: <4819@balrog.ctron.com>
  6. Date: 22 Aug 92 14:10:37 GMT
  7. Sender: usenet@balrog.ctron.com
  8. Lines: 16
  9.  
  10.  
  11. Basically, you want to place the LAI library symbols in your DA schematic
  12. and change the properties of concern. As you go through the menus, by the
  13. time you get to a particular choice, ie a I80386-20 (PIN), this picks out
  14. the exact timing, which is put into the model property. This model property
  15. is a label into the model table, which will select the model.
  16.  
  17. SInce it is a processor, you may want to use a PCL file to initialize it.
  18. THe best place to look is in the 2 volume set of Smart Model library 
  19. databook. It is also kept online in the library_docs/datasheets directory
  20. under your lai models directory. There is a datasheet for each model.
  21.  
  22. I looked briefly at the 386 and the only property of interest would be
  23. the pcl_file. Package is irrelevant.
  24.  
  25. Good luck. If you have some more specific questions, I will try to help.
  26.