home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.system
- Path: sparky!uunet!pipex!warwick!dcs.warwick.ac.uk!flash
- From: flash@dcs.warwick.ac.uk (J J Greensted)
- Subject: Video source controller for the Macintosh
- Message-ID: <1992Sep3.080257.14080@dcs.warwick.ac.uk>
- Sender: news@dcs.warwick.ac.uk (Network News)
- Nntp-Posting-Host: stone
- Organization: Department of Computer Science, Warwick University, England
- Date: Thu, 3 Sep 1992 08:02:57 GMT
- Lines: 29
-
- Hello Net People,
-
-
- Does anyone out there know of a Macintosh Hardware board that will allow me to
- control multiple video sources.
-
- The idea is to use the board as a switching mechanism for video signal.
- [I DO NOT WANT TO DIGITISE THE SIGNALS.]
-
- There will probably be say 5 - 10 input video signals which must be
- switched to 1 or may be 2 output lines.
-
- As I suspect that no board like this exists, if anyone has an input/output
- controller board on which we could build this stuff I would like to hear about
- it.
-
-
- Thanks in advance for all replies
-
-
- Jonathan
-
-
- flash@uk.ac.warwick.dcs
- --
-
- --
- Jonathan Greensted, Warwick Universty.
- flash@uk.ac.warwick.dcs
-