home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!paladin.american.edu!darwin.sura.net!wupost!cs.utexas.edu!torn!maccs!mcshub!csx.cciw.ca!u009
- From: u009@csx.cciw.ca (G. Stewart Beal)
- Subject: Televideo Hard/Floppy/Tape controller Info needed
- Organization: Canada Centre for Inland Waters
- Date: Sat, 29 Aug 1992 19:59:54 GMT
- Message-ID: <1992Aug29.195954.25469@csx.cciw.ca>
- Lines: 17
-
-
- I have come into possession of a bunch of Televideo Systems, Inc. full length
- floppy/hard disk/tape 16 bit controller cards. The boards are marked
- #128600-00 Rev D. The MFM drive portion has a Western Digital WD1010A-PL
- and WD1100-PE chips, the floppy part has a SMC FDC765A chip and 2 custom
- PLCC chips labelled 1) LIA2048 270868-00 FD/HDTELAT and 2) LIA2047
- 270855-00 ATAPECNTLR are in the center of the board. The top of the board
- has 2 20 pin and 1 34 pin header for the hard disks, a 34 pin for the floppy
- and a 50 for the tape drive. There are a total of about 11 jumper blocks on
- the board and a 10 position DIP switch visible through the mounting bracket.
- The floppy appears to work on all cards, but the hard disk doesn't, probably
- because the addresses are set wrong.
- If you have any documentation on these cards, I'd like to hear from you.
- I'd like to make use of them if possible.
-
- Regards, Stu Beal, VE3MWM, U009@cs.cciw.ca,
- National Water Research Institute, Burlington, Ontario, Canada.
-