home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.hp
- Path: sparky!uunet!caen!hellgate.utah.edu!hoosier.cs.utah.edu!mjb
- From: mjb%hoosier.cs.utah.edu@cs.utah.edu (Mark Bradakis)
- Subject: local/remote console config?
- Date: 1 Sep 92 16:27:24 MDT
- Message-ID: <1992Sep1.162725.3165@hellgate.utah.edu>
- Organization: Fat Chance Garage and Brewery
- Lines: 17
-
- Boy, do I feel dumb. We just installed one A2042A board in our 400s to make
- it a 433s machine. The problem is, the new board is set for a remote console
- over a serial port, but I want to have it use the graphics card for the
- console. And I can't find how to change it. I have docs for the 300, the
- 700 machines and the 800 machines, but do not seem to have any info on the
- 400 machines! The booklet I do have says something like "Check the Peripheral
- Installation Guide, Vol. 1 and 2 to change the default settings" and of course
- all the manuals I have do not cover the 400.
-
- Can anyone out there tell me what switch, jumper or ?? needs to be frobbed
- to get the machine to use the local console?
-
- Thanks,
- mjb.
-
-
- mjb@hoosier.utah.edu
-