home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!wupost!usc!nic.csu.net!csusb!mcgee
- Newsgroups: comp.sys.dec
- Subject: Re: Help!! ECC Memory Problems from HELL!!
- Message-ID: <1992Aug27.161246.1@csusb>
- From: mcgee@csusb
- Date: 27 Aug 92 16:12:46 PST
- References: <94778@bu.edu>
- Organization: California State University, San Bernardino
- Nntp-Posting-Host: csusb
- Nntp-Posting-User: nsci070
- Lines: 20
-
- In article <94778@bu.edu>, SYSTEM@BUPULA.BU.EDU (John Rassulo) writes:
- > Can anyone out therehelp me with an ECC memory problem??
- > I have a MV3600 with 16MB of DEC memory. I keep getting:
- >
- > High CRD Error Rate
- > DMA Error
- > Correctable ECC Error
- > Physical Page Add = 07368(x)
- > Ecc Error Syndrone = 3D(x)
- > Bank 6
- > Memory Module #2 .....and on and on and on it goes
- >
- > First, I replaced the memory module #2, which was a Dec 8MB
- > board. The problem remained! So I replaced the second module, another
- > 8MB board. The problem continued. So I replaced the memory interconnect
- > with a sheilded cable. NOT!! Any ideas???
-
- Try replacing the CPU.
-
- Jeff.
-