home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!ogicse!hp-cv!sdd.hp.com!ux1.cso.uiuc.edu!news.cso.uiuc.edu!uxa.cso.uiuc.edu!dvsg0223
- From: dvsg0223@uxa.cso.uiuc.edu (David Salamon)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Size of a Zorro II card
- Message-ID: <BtyoJ1.94v@news.cso.uiuc.edu>
- Date: 2 Sep 92 17:28:12 GMT
- Article-I.D.: news.BtyoJ1.94v
- References: <phil.715308233@adam.adelaide.edu.au> <copes.715425394@pride>
- Sender: usenet@news.cso.uiuc.edu (Net Noise owner)
- Organization: University of Illinois at Urbana
- Lines: 17
-
-
- >phil@adam.adelaide.edu.au (Phil Kernick) writes:
- >>Could someone please tell me the maximum physical size of a Zorro II card.
- >>That is, from the bottom of the edge connector to the top of the card.
- >>Why you ask? I am thinking of building a Zorro II cage for my A1000 and I
- >>need to know how big to make it.
-
- The card dimensions are the same as an AT card, just with an extra 100 pin
- connector for the Zorro bus. The exact dimensions are in the Hardware
- Reference Manual, but I believe the height is 4.5 inches (2.54 cm/inch).
-
- David
-
- --------------------------------------------------------------
- David Salamon Physics Graduate Student (Slave)
- d-salamon@uiuc.edu University of Illinois
- --------------------------------------------------------------
-