home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!wupost!waikato.ac.nz!comp.vuw.ac.nz!actrix!keith
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Reboot with 1.3 using SetCpu under 2.04
- Message-ID: <1992Sep2.060828.19559@actrix.gen.nz>
- From: keith@actrix.gen.nz (Keith Stewart)
- Date: Wed, 2 Sep 1992 06:08:28 GMT
- References: <1992Aug27.090130.15556@actrix.gen.nz> <34791@cbmvax.commodore.com>
- Organization: Actrix Information Exchange
- Keywords: SetCpu ROM
- Lines: 35
-
- In article <34791@cbmvax.commodore.com> daveh@cbmvax.commodore.com (Dave Haynie) writes:
- > In article <1992Aug27.090130.15556@actrix.gen.nz> keith@actrix.gen.nz (Keith Stewart) writes:
- > >I am trying to reboot using SetCpu KICKROM DF1: . I have a 1.3 Kickstart
- > >disk in df1:
- >
- > There are two things you should try. Some Amigas (no way to tell which) have
- > 8520s that tend to take a little extra-long to start working after they come
-
- Can these be easily replaced ?
-
- > out of reset. Experimentation with the SetCPU DELAY parameter (takes numbers
- > from 1 to 100, default is 10) should eliminate this problem, if that is the
-
- I have tried a lot of different numbers Is there a quantum i.e 5 10 15 20
-
-
- > problem you're having. Chip RAM can't be turned on until one of the 8520s is
-
- If I reboot and then break the startup-sequence then Setcpu KICKROM df1: DELAY n
- the kickstart loads but the screen stays green and the power light flickers
- I presume this is something wrong with CHIP RAM
-
- > working. Also make sure you're using SetCPU V1.6 -- older versions of SetCPU
- > don't have any knowledge of 2.0 and may cause trouble.
-
- I am using SetCpu 1.61 by Dave the DAD Haynie :-)
-
- >
- > --
- > Dave Haynie Commodore-Amiga (Amiga 3000) "The Crew That Never Rests"
- > {uunet|pyramid|rutgers}!cbmvax!daveh BIX: hazy
- > "Work like a horse, drink like a fish" - Psychefunkapus
- >
-
- Keith
-