home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!gatech!usenet.ins.cwru.edu!agate!iat.holonet.net!uupsi!psinntp!newstand.syr.edu!rvillari
- From: rvillari@cat.syr.EDU (R. Alberto Villarica)
- Subject: Re: Looking for Prototyping board
- Message-ID: <RVILLARI.92Aug29095037@lynx.cat.syr.EDU>
- In-reply-to: ericj@hwcae.Honeywell.COM's message of Thu, 27 Aug 1992 23:44:55 GMT
- Organization: Syracuse University
- References: <RVILLARI.92Aug26223931@lynx.cat.syr.EDU>
- <ERICJ.92Aug27174455@lagos.cfsat.Honeywell.COM>
- Date: Sat, 29 Aug 92 09:58:32 EDT
- Lines: 36
-
- In article <ERICJ.92Aug27174455@lagos.cfsat.Honeywell.COM> ericj@hwcae.Honeywell.COM (Eric Jacobsen) writes:
-
- > Newsgroups: comp.sys.amiga.hardware
- > Path: newstand.syr.edu!psinntp!psinntp!rpi!uwm.edu!src.honeywell.com!hwcae!ericj
- > From: ericj@hwcae.Honeywell.COM (Eric Jacobsen)
- > Sender: news@src.honeywell.com (News interface)
- > Nntp-Posting-Host: lagos.hwcae.az.honeywell.com
- > Organization: Honeywell, Air Transport Division; Phoenix, AZ
- > References: <RVILLARI.92Aug26223931@lynx.cat.syr.EDU>
- > Date: Thu, 27 Aug 1992 23:44:55 GMT
-
- > In article <RVILLARI.92Aug26223931@lynx.cat.syr.EDU> rvillari@cat.syr.EDU (R. Alberto Villarica) writes:
-
- > I'm looking for an autoconfiguring prototyping board for either Zorro
- > II or Zorro III. I remember seeing someone posting about this several
- > months ago. Any pointers would be greatly appreciated.
-
- > Well, I can attest to the fact that bare Zorro II boards can be had. I
- > bought two from somebody who used to advertise in Amazing Computing (if
- > I remember correctly), and built up a data acquisition board on
- one.
-
- I have one of those zorro II boards without any autoconfig logic. But
- I remember seeing someone post (from outside the US -- Europe or
- Australia) that said they had prototyping boards WITH autoconfig logic
- (that caught my eye) -- maybe they hardwired it to be the hacker's ID
- or something.
-
- I think that burning PALs would be a problem for me and I would not
- like to have to convert it into logic gates (which may take up the
- whole board and leave no space for the A/D stuff -- I haven't looked
- at the equations).
-
- Thanks.
-
- ~Al
-