home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.protocols.ppp:740 comp.dcom.modems:12829
- Newsgroups: comp.protocols.ppp,comp.dcom.modems
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.INS.CWRU.Edu!agate!boulder!boulder!laura
- From: laura@boulder.colorado.edu (Laura Compagnoni)
- Subject: Help with World Blazer
- Message-ID: <1992Sep1.172122.8640@colorado.edu>
- Sender: news@colorado.edu (The Daily Planet)
- Nntp-Posting-Host: beagle.colorado.edu
- Reply-To: laura@boulder.colorado.edu (Laura Compagnoni)
- Organization: University of Colorado, Boulder
- Date: Tue, 1 Sep 1992 17:21:22 GMT
- Lines: 29
-
- I have two WorldBlazer's wich I want to use to run PPP.
- I was successfull in setting the modems up in such a way that the one I use
- for dial in works fine when I call using a T2500.
- But if I use the other WB to dial out the chat program can not communicate
- well with the modem and the call aborts before the modem goes on hook.
- I tried to dial out with tip, the version that comes with slip, and the
- dialer get confused as well.
- Is anybody using this modem with better luck than me?
- I should mention that the only way I can dial out using the WB is with kermit.
-
- This is the configuration of the dialing out modem:
-
- WorldBlazer - SA - Version LA5.00W- Active Configuration
- B1 E0 L2 M1 Q0 T V1 X1 Y0
- &C1 &D3 &G0 &J0 &L0 &Q0 &R3 &S1 &T4 &X0
- S000=0 S001=0 S002:128 S003=13 S004=10 S005:254 S006=2 S007=40
- S008=2 S009=6 S010=14 S011=70 S012=50 S018=0 S025=5 S026=1
- S038=0 S041=0 S045=0 S046=0 S047=4 S048=0 S050=0 S051:254
- S056=17 S057=19 S058:2 S059=0 S060=0 S061:0 S062=15 S063=0
- S064=0 S068=255 S069=0 S090=0 S092=0 S093=8 S094=1 S100=0
- S104=0 S105=1 S111:0 S112=1 S151=4 S155=0 S180=2 S181=1
- S183=25 S190:0 S191=7 S253=10 S254=255 S255=255
- OK
-
-
- Thanks for any help
-
- Laura Compagnoni
- laura@alumni.colorado.edu
-