home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.networking
- Path: sparky!uunet!gatech!psuvax1!atlantis.psu.edu!fert1.fe.psu.edu!lbelan
- From: lbelan@fert1.fe.psu.edu (Lawrence Belan ][/40960)
- Subject: Loading IBM LSP in a VDM
- Message-ID: <p8+vH7-pc9@atlantis.psu.edu>
- Sender: news@atlantis.psu.edu (Usenet)
- Organization: PennState - Fayette Campus Computer Center
- Date: Tue, 01 Sep 92 13:33:25 GMT
- Lines: 35
-
- Has anyone been able to sucessfully load the IBM lan support program
- for the token ring card ALONG with the himem.sys driver?
-
- I can get it to work without loading himem.sys, but then there isn't
- enought memory to work with. Here's a copy of my VDM config.sys:
- (d: is where os2 is, c: is my DOS boot drive, e: has 4dos on it.)
-
- dos=high,umb
- device=d:\os2\mdos\fsfilter.sys
- device=d:\os2\mdos\himem.sys
- rem this line didn't work, the x= is for the token ring rom/ram area
- rem device=d:\os2\mdos\emm386.sys noems X=ce00-d400
- files=40
- buffers=8
- lastdrive=Z
- shell=e:\4dos\4dos.com /E:2048 /P @e:\4dos\4dos.ini
- rem i tried these as devicehigh, but they won't load if himem.sys is loaded.
- device=c:\sys\dxma0mod.sys
- device=c:\sys\dxmc0mod.sys ,D000
- devicehigh=c:\sys\ansi.sys
-
- the version of the lsp is 1.25 (that came with the extended services)
-
- Any ideas?
- --
- Lawrence (Larry) Belan ][ lbelan@fert1.fe.psu.edu
- Computer/Telecommunications Specialist bp3@psuvm.psu.edu (or)
- PennState - Fayette Campus bp3@psuvm.bitnet
- Route 119 North Box 519 75745.242@compuserve.com
- Uniontown, PA 15041-0519 (412) 430-4163
- --
- Lawrence (Larry) Belan ][ lbelan@fert1.fe.psu.edu
- Computer/Telecommunications Specialist bp3@psuvm.psu.edu (or)
- PennState - Fayette Campus bp3@psuvm.bitnet
- Route 119 North Box 519 75745.242@compuserve.com
-