home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.ms-windows.misc
- Path: sparky!uunet!mnemosyne.cs.du.edu!nyx!glowe
- From: glowe@nyx.cs.du.edu (Glen Lowe)
- Subject: Re: SLIP & WinQVT
- Message-ID: <1992Sep1.191700.5915@mnemosyne.cs.du.edu>
- X-Disclaimer: Nyx is a public access Unix system run by the University
- of Denver for the Denver community. The University has neither
- control over nor responsibility for the opinions of users.
- Sender: usenet@mnemosyne.cs.du.edu (netnews admin account)
- Organization: Nyx, Public Access Unix at U. of Denver Math/CS dept.
- References: <1992Aug31.235951.8313@usage.csd.unsw.OZ.AU> <1992Sep1.072547
- Date: Tue, 1 Sep 92 19:17:00 GMT
- Lines: 19
-
- In article <1992Sep1.140011.19912@zip.eecs.umich.edu> ayman@eecs.umich.ed
- (Ayman I. Kayssi) writes:
- > glowe@nyx.cs.du.edu (Glen Lowe) writes:
- >>Before you get too excited... I was able to get qvtnet to work at
- >>speeds < 2400 baud... But as soon as i move up to 9600+ qvt crashes
- >>windows with a gpf...
- >
- >I can run qvtnet over a serial line at 19200 bps with no problems at all
- That
- >became possible after I upgraded the UART on the serial card to a 16550A
- N.
- >--
- >Ayman I. Kayssi | ayman@eecs.umich.edu
- >EECS Department +------------------------
- >University of Michigan | (313) 764-8033
-
-
- That's funny... I have one also and it still crashes...
-
-