home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.wizards
- Path: sparky!uunet!cis.ohio-state.edu!zaphod.mps.ohio-state.edu!caen!hellgate.utah.edu!fcom.cc.utah.edu!cs.weber.edu!terry
- From: terry@cs.weber.edu (A Wizard of Earth C)
- Subject: Re: 4 questions [vt100, 2 modems, printer]
- Message-ID: <1992Aug18.021432.8827@fcom.cc.utah.edu>
- Sender: news@fcom.cc.utah.edu
- Organization: Weber State University (Ogden, UT)
- References: <3366@ra.nrl.navy.mil>
- Date: Tue, 18 Aug 92 02:14:32 GMT
- Lines: 30
-
- In article <3366@ra.nrl.navy.mil> deal@hightop.nrl.navy.mil (Richard Deal) writes:
- >I have 4 questions thanks for ANY help with these.
- >
- >first ( and probably the easyest )
- >Have an old Digital VT100, I know how to change the settings on it
- >but can not figure out how to save them. It is really frustrating to
- >have to reset the baud, etc every time I turn it on.
-
- shift-S while in setup mode (just like it says in the "old Digital VT100"
- manual).
-
- >second
- >Have A/UX 3.0 on MacII with local imagewriterII. The printer works fine
- >from sys7 programs. I set up lpr and later lp to do UNIX printing, but
- >the printer wraps long lines ( >96 chars ) back onto the begining of
- >the line. It appears to be getting a carage-return but no line feed.
-
- Change your switch settings, or make sure ocrnl is stty'ed in your filter.
-
- Terry Lambert
- terry_lambert@gateway.novell.com
- terry@icarus.weber.edu
- ---
- Any opinions in this posting are my own and not those of my present
- or previous employers.
- --
- -------------------------------------------------------------------------------
- terry@icarus.weber.edu
- "I have an 8 user poetic license" - me
- -------------------------------------------------------------------------------
-