home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!paladin.american.edu!darwin.sura.net!mips!swrinde!elroy.jpl.nasa.gov!sdd.hp.com!ux1.cso.uiuc.edu!news.iastate.edu!isucard.card.iastate.edu!MLONG
- From: MLONG@isucard.card.iastate.edu
- Newsgroups: comp.sys.zenith
- Subject: Re: 3.5" floppy on Zenith 151?
- Message-ID: <16841E0C9.MLONG@isucard.card.iastate.edu>
- Date: 12 Aug 92 21:59:01 GMT
- References: <DWSMITH.92Aug11124318@fred.lll-winken.llnl.gov>
- Sender: news@news.iastate.edu (USENET News System)
- Organization: CARD
- Lines: 27
-
- In article <DWSMITH.92Aug11124318@fred.lll-winken.llnl.gov>
- dwsmith@fred.lll-winken.llnl.gov (David Smith) writes:
-
- >
- >Hello, I have a old Zenith 151 and I was wondering if it is possible to add a
- >3.5" floppy this old of a machine? Replies my be mailed directly to me or
- >posted. If it is possible, what do I need to get?
- >
- >Thank you,
- >
- >
- >David W. Smith
- >dwsmith@llnl.gov
- >--
- >David W. Smith
- >
- We have done this with 720 KB drives, just needed to change the floppy cable
- slightly, as its length betwwen the connectors wasn't enough, set the system
- switches to tell it has 2 floppies, and run DSKSETUP if pre-DOS 5.0. If DOS
- 5.0 take a look at the DRIVPARM command line for CONFIG.SYS in the manual.
- I think we used Toshiba? 720KB drives.
- I do not think that 1.44MB or 2.88MB mechanisms will work with your present
- floppy disk controller.
- Check the drive select switches and terminating resistors on the floppies
- also.
- Mike Long
- Iowa State University
-