home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!ferkel.ucsb.edu!taco!bcasper
- From: bcasper@eos.ncsu.edu (Brian Casper)
- Subject: Oak VGA board question
- Message-ID: <1992Aug22.192042.24202@ncsu.edu>
- Originator: bcasper@c00477-224wi.eos.ncsu.edu
- Lines: 8
- Sender: news@ncsu.edu (USENET News System)
- Reply-To: bcasper@eos.ncsu.edu
- Organization: North Carolina State University
- Date: Sat, 22 Aug 1992 19:20:42 GMT
-
-
- In the interest of keeping my system upgrades at minimal cost, I
- recently traded some stuff for an Oak Technologies 256K VGA card.
- It's a 16 bit half card with both 9 and 15 pin connectors on the
- back. I have the pinouts for the 15 pin, but I don't know what
- the 9 pins are wired for. Also, can somebody tell me what the
- 4 bank dip switch settings are? Any help appreciated...
-
- --
- --
- Brian Casper | "I like to study psychologists. It gives
- bcasper@eos.ncsu.edu | good insight into what rats are thinking."
- Pinball Consultant | - Dr. Oscar Wesler
-