home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!valinor.mythical.com!stu
- From: stu@valinor.mythical.com (Stu Labovitz)
- Newsgroups: comp.sys.ibm.pc.hardware
- Subject: Re: Specs on Conner CP3204 200MB IDE drive
- Keywords: Conner CP3204
- Message-ID: <6aVkPB4w165w@valinor.mythical.com>
- Date: Sat, 15 Aug 92 21:26:40 CDT
- References: <BsxMMK.o3@rice.edu>
- Distribution: world
- Organization: (What? Organized??) - Mythical Computer Systems
- Lines: 27
-
- frank@owlnet.rice.edu (Frank T. Kang) writes:
-
- > Can someone post/email the CMOS setup parameters(i.e. heads, cylinders, etc)
- > for the Conner CP3204 drive? Thanks in advance.
-
- Let's see. My Conner Installation Guide (dated 8/91) says the following
- about the CP3204:
-
- Heads Cylinders Sectors PComp L-Zone Type Table LED
- 16 683 38 0 683 *UT 2 B
-
- Table 2: Jumper Settings *UT = Universal translate. Select a
- Single Drive = Jumper C/D drive type that is close to but does
- Master Drive = Jumper C/D & DSP not exceed the megabyte capacity of
- Slave Drive = No jumpers installed the drive. The drive will translate
- to the megabyte capacity you have
- LED Table B: J-5 selected.
- Pin 3 = +
- Pin 4 = -
-
-
- Stuart L Labovitz Internet: stu@valinor.mythical.com
- (insert standard disclaimer here) UUCP: uunet!valinor!stu
-
- Duct tape is like the force. It has a light side, a dark side,
- and it holds the universe together. --- Carl Zwanzig
- =============================================================================
-