home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!ogicse!das-news.harvard.edu!spdcc!lj
- From: lj@spdcc.com (Len Jacobs)
- Newsgroups: comp.sys.3b1
- Subject: uucp question/problem
- Summary: CAN'T ACCESS DEVICE
- Message-ID: <1992Aug17.011928.19355@spdcc.com>
- Date: 17 Aug 92 01:19:28 GMT
- Article-I.D.: spdcc.1992Aug17.011928.19355
- Organization: S.P. Dyer Computer Consulting, Cambridge MA
- Lines: 38
-
- After using the stock "cu" & "uucp" I finally added a Telebit & HoneyDanber
- to my 3B1. The connex went fairly smoothly and all the help files available
- on the net allowed for a simple set up, but for ONE annoying problem.
-
- When I attempt to connect directly to the modem, or when I invoke uucico,
- the uucico response is "CAN'T ACCESS DEVICE". So I recyle the power on the
- Telebit & all works fine. But after the disconnect (from either "cu" or
- "uucp") I again have this problem. This never happened using the stock
- cu & uucp with a Hayes at 1200.
-
- I am connecting via /dev/tty000 and have the telebit set as follows:
- ==============================================================================
- E0 F1 M0 Q6 T V1 X3 Version BA4.00
- S00=001 S01=000 S02=255 S03=013 S04=010 S05=008 S06=002 S07=060 S08=002 S09=006
- S10=007 S11=050 S12=050
- S45=000 S47=004 S48=000 S49=000
- S50=000 S51=254 S52=002 S53=004 S54=003 S55=000 S56=017 S57=019 S58=002 S59=000
- S60=000 S61=090 S62=003 S63=001 S64=001 S65=000 S66=000 S67=000 S68=255
- S90=000 S91=000 S92=001 S95=000
- S100=000 S101=000 S102=000 S104=000
- S110=001 S111=030 S112=001
- S121=000
- N0:
- N1:
- N2:
- N3:
- N4:
- N5:
- N6:
- N7:
- N8:
- N9:
- OK
-
- Do you have any suggestions? Thanks.
- --
- Daria Jacobs (AKA) "The Cutie"
- lj@ursa-major.SPDCC.COM
-