home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!cs.utexas.edu!torn!maccs!eismv3.dofasco.ca!eis.dofasco.ca!hauser_s
- Newsgroups: comp.protocols.tcp-ip.ibmpc
- Subject: RE: Novell and WinQVT/Net
- Message-ID: <1992Aug18.120819.1@eis.dofasco.ca>
- From: hauser_s@eis.dofasco.ca
- Date: 18 Aug 92 12:08:19 GMT
- Organization: Dofasco Inc, Hamilton, Ont. Can.
- Nntp-Posting-Host: eismv4
- Nntp-Posting-User: hauser_s
- Lines: 15
-
- I have used WinQVT with Novell, but without the ODI drivers. Unless
- you need the ODI support, you'd save memory (and likely some time) by
- omitting the ODI layer.
-
- This is how I did it:
-
- 3c503 -n -w 0x7e 0x4 0x300 1
- pktint
- ipxpkt.com
- netx
-
- You should be able to load most of these into high memory as well.
-
- Steve Hauser
- Hauser_S@eis.dofasco.ca
-