home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!walter!att!linac!pacific.mps.ohio-state.edu!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!ames!purdue!mentor.cc.purdue.edu!hobbes.psych.purdue.edu!esmith
- From: esmith@hobbes.psych.purdue.edu (Eliot R. Smith)
- Newsgroups: comp.os.os2.networking
- Subject: trouble installing tcp/ip 1.2.1
- Summary: C000005 error after install/configure
- Message-ID: <56732@mentor.cc.purdue.edu>
- Date: 13 Aug 92 15:46:57 GMT
- Sender: news@mentor.cc.purdue.edu
- Organization: Purdue University
- Lines: 19
-
- I recently wanted to add TCP/IP version 1.2.1 to my OS/2 2.0 system
- (Gateway 2000 486DX2/50, 8 MB, SMC = WD Ethercard Plus Elite 16 network
- card). The installation and configuration seemed to go smoothly, but
- on rebooting I get a series of messages from the device drivers loaded
- in CONFIG.SYS and then a blank screen and c000005 in the upper left corner.
-
- I know the machine, OS/2, and card work OK because have been running
- PC-NFS in a VDM to access the network.
-
- Anybody have any ideas on what could cause this and what sorts of things
- I should check for? I've poked around but find nothing obviously wrong,
- e.g., in the entries in the PROTOCOL.INI file.
-
- Thanks in advance -- Eliot Smith
-
- --
- Eliot R. Smith Dept. of Psychological Sciences, Purdue University
- Phone: (317) 494-7709 West Lafayette, Indiana 47907-1364 USA
- Domain: esmith@psych.purdue.edu BITNET: esmith@PURCCVM
-