home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!swrinde!mips!apple!bionet!raven.alaska.edu!acad2.alaska.edu!axpmw
- From: axpmw@acad2.alaska.edu
- Newsgroups: comp.os.os2.misc
- Subject: Help w/OS2 Dual Boot DOS
- Message-ID: <1992Aug12.213554.1@acad2.alaska.edu>
- Date: 13 Aug 92 01:35:54 GMT
- Sender: news@raven.alaska.edu (USENET News System)
- Organization: University of Alaska
- Lines: 24
- Nntp-Posting-Host: acad2.alaska.edu
-
- Is there anyway to add the dual dos boot option after os2 has
- been installed?
-
- I had it set up that way during the 1st install... then something died,
- and I re-installed os2... after a few attempts I had it installed
- to find out that my dual dos boot option is gone! (I was sure to
- make sure the config.sys was my old one (set up like the book says to do!)
-
- so how do I get it back? copy the config.sys again?
-
- I'm ready to by a cheap cheap 2ndary machine to run this os2 on
- and free my 486/33 back up... I don't have these problems w/my amiga!
- (plus it doesn't take 2 mins to boot up either!)
-
- Email is fine... any help is greatly greatly appreciated.
- (any ideas when os2 vers 3.0 is going to be out? ... maybe it
- will fix things... but it probably will need a whole hard drive (80mb)
- to itself...) arggggggggggggggggggggggggggh
-
- Thanks Pam
- --
- Pam Woods Email: Internet: axpmw@acad2.alaska.edu
- University Of Alaska Anchorage Bitnet: axpmw@alaska
- System: A3000/25/40Mb/Wb2.04
-