home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1993 #3 / NN_1993_3.iso / spool / rec / video / 16494 < prev    next >
Encoding:
Internet Message Format  |  1993-01-28  |  4.1 KB

  1. Path: sparky!uunet!crdgw1!cook!sarah!rpi!batcomputer!munnari.oz.au!mel.dit.csiro.au!its.csiro.au!NewsWatcher!user
  2. From: gre253@its.csiro.au (Steve Green)
  3. Newsgroups: rec.video
  4. Subject: Re: Home Theater
  5. Message-ID: <gre253-270193125200@152.83.8.10>
  6. Date: 27 Jan 93 02:03:58 GMT
  7. References: <1993Jan25.181137.24973@medtron.medtronic.com>
  8. Sender: news@its.csiro.au
  9. Followup-To: rec.video
  10. Organization: Comms group, ITS branch, CSIRO
  11. Lines: 84
  12. Nntp-Posting-Host: toyland.its.csiro.au
  13.  
  14. In article <1993Jan25.181137.24973@medtron.medtronic.com>,
  15. barham@medtronic.COM (Bill Barham) wrote:
  16. > Hi,
  17. > I am trying to assemble a home theater on a limited budget.  I need a HI-FI VHS
  18. > VCR, A/V receiver, and surround speaker system.  I will be using a Panasonic 27"
  19. > super flat monitor.  Based on what I have read and comments on the net, I have
  20. > narrowed my choices to the following:
  21. > Mitsubishi HS-U56 HI-FI VHS VCR    ($329)
  22. > JVC HR-S4700U HI-FI Super VHS VCR  ($429)
  23.  
  24. I have a JVC HR-S5800EA SVHS Hi-Fi VCR. Very nice unit. Although it is
  25. EXTREEMELY
  26. fussy about tape quality. Some rental tapes play up very badly on this
  27. machine, but
  28. give tolerable results on my much older Akai VS-303EA VCR.
  29.  
  30. > Pioneer VSX-501 A/V receiver       ($279)
  31. > Sony STR-D990 A/V receiver         ($289)
  32. > I have not decided about the speakers yet, the Cambridge Sound Works speakers
  33. > seem to be very cost effective.  The prices listed are the best mail order prices
  34. > that I have found, not including shipping.  I was not originally considering SVHS,
  35. > but I am leaning towards the JVC because it is so close in cost to a VHS unit.  I
  36. > am leaning towards the Pioneer receiver because it has more video inputs (3 vs 2).
  37.  
  38. Have a look at Yamaha's pro-logic A/V recievers and amps. Very very nice!
  39. No problem
  40. with 3 video inputs either - my DSP-A1000 has VCR1,VCR2 and LD.
  41.  
  42. > In general, it seems like the Pioneer units are more video biased and the Sony 
  43. > units are more audio biased.  I have a question regarding the VSX-501, one source
  44.  
  45. I too looked at Sony before buying. I got the feeling they have only
  46. recently voyaged
  47. into this area, wheras Yamaha have been right into it for some time.
  48.  
  49. > indicated it had 100W right and left, 65W center, but another source indicated
  50. > that the unit had EITHER 100W left and right if used in a sterio mode OR 65W right,
  51. > left, and center if used on Pro-Logic mode.  If the second source is correct, is
  52. > this true of all A/V receivers?  I have seen many positive comments on the net 
  53.  
  54. This is not true for all A/V recievers. The A1000 has separate main,
  55. centre, front
  56. and rear channel amplifiers. Total power output IS amazing!
  57.  
  58. > regarding the HS-U56, I would like to hear comments on the JVC, the recievers,
  59. > and low cost speaker recommendations.  Also, I would like to find out how well
  60. > converted VHS tapes work in SVHS mode.  I regularly read this group, so you can
  61.  
  62. I liked the Yamaha YST10s as effect speakers for two reasons, they were
  63. cheap, and
  64. they could be hung on the wall. 
  65.  
  66. Converting GOOD QUALITY VHS tapes into SVHS tapes is a good idea, and saves
  67. me a load
  68. of money ( $AUS24 SVHS to $AUS12 VHS ). I typically use TDK EHG tapes for
  69. this
  70. purpose. You do notice the difference, but it is only marginal, and usually
  71. only
  72. near the start of the tape. LP, however, does show up the difference.
  73.  
  74. I still lash out and buy the occassional "real" SVHS tape just to spoil
  75. myself! :-)
  76.  
  77.  
  78. > post your comments or send me email.  BTW, this group needs a FAQ posing.  Thanks
  79. > in advance for your help.
  80.  
  81. > ---
  82. > Thanks,
  83. > Bill Barham                        Medtronic Micro-Rel   602-921-6439
  84. > Staff CAD Software Engineer        email: barham@tmp.medtronic.com
  85.  
  86. Happy shopping.
  87.  
  88. ========================================================================
  89. | Steve Green     |  "Hey Rocky, watch me pull a rabbit outa my hat !" |
  90. | Comms Group     |  "That trick never works"                          |
  91. | ITS Branch      |  "Nothin' up my sleeve - PRESTO !"                 |
  92. | CSIRO Australia |  "No doubt about it - I gotta get another hat"     |
  93. ========================================================================
  94.