home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1993 #3 / NN_1993_3.iso / spool / rec / bicycles / tech / 3335 < prev    next >
Encoding:
Text File  |  1993-01-23  |  1.5 KB  |  39 lines

  1. Newsgroups: rec.bicycles.tech
  2. Path: sparky!uunet!cs.utexas.edu!sdd.hp.com!ux1.cso.uiuc.edu!news.iastate.edu!isuvax.iastate.edu!TWJM8
  3. From: twjm8@isuvax.iastate.edu
  4. Subject: Re: XC-PRO shifting. Suggestions sought.
  5. Message-ID: <C1A083.Ax9@news.iastate.edu>
  6. Sender: news@news.iastate.edu (USENET News System)
  7. Reply-To: twjm8@isuvax.iastate.edu
  8. Organization: Iowa State University, Ames, Iowa
  9. References: <1993Jan22.202109.28433@colorado.edu>
  10. Date: Fri, 22 Jan 1993 22:09:35 GMT
  11. Lines: 26
  12.  
  13. In article <1993Jan22.202109.28433@colorado.edu>, doug@shako.Colorado.EDU (Doug McKnight) writes:
  14. >
  15. >Hi. My suntour XC-Pro equipped mountain bike  suffers from 
  16. >(in my opinion) rather poor shifting. 
  17. >
  18. > {info on the symptoms deleted}
  19.  
  20. >The cluster is a 13-28 suntour winner pro which the shop assures me is
  21. >correctly matched with the shifter. I don't know what the chain is. It is
  22. >original MB-1 equipment and again, i am assured by the shop that it's 
  23. >fine for the suntour transmission. 
  24. >
  25. >What is peoples experience of this group? Is there a chain which is known
  26. >to work well with it? 
  27. >
  28. >All comments appreciated---except those saying "buy XTR".
  29. >
  30. >Douglas
  31. >
  32. I had the sam problems when I bought my MB-1.  The dealer replaced the original
  33. Daido chan with a Sachs Sedisport ATB and my shifting is now fine.  I have to
  34. admit, though, I am thinking about replacing the freewheel with a Shimano
  35. Hyperglide one because my old bike with Exage components shifted better under
  36. load.  Other than that one problem, I love the drivetrain.
  37.  
  38. Dave
  39.