home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!decwrl!hal.com!olivea!spool.mu.edu!howland.reston.ans.net!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!hamblin.math.byu.edu!yvax.byu.edu!cunyvm!pvjqc
- From: PVJQC@CUNYVM.BITNET
- Newsgroups: comp.sys.sun.admin
- Subject: Slip crashes with "mbuf map full errors" on Suns
- Message-ID: <93026.195029PVJQC@CUNYVM.BITNET>
- Date: 27 Jan 93 00:50:29 GMT
- Organization: City University of New York/ University Computer Center
- Lines: 25
-
-
- Hello Slip experts,
-
- I have gotten public-domain slip (Slip-4.0) working on the Sun4 and
- Sun4c over T3000 telebit modems. I use kermit to dial out to a Sun4
- and then invoke `sliplogin', get back to the Sun4c, suspend kermit and
- invoke sliplogin. The connection remains and works fine for a day or
- 2 and then takes both the systems down giving `mbuf map full' kind of
- an error. I had downloaded a patch called 100149-03 and applied on both
- the machines hoping the problem would be taken care of. IT does not help
- apparently. (This patch was obtained from the same site where the slip
- distribution was kept).
- Does any one know about this problem? Is it something silly that I am missing
- or so? I am using the serial port on the cpu board for slip connection( ttya)
- Any help would be appreciated.
- Thank you very much.
- -------
-
- *********************************************************
- * PRASHANT V. JOSHI *
- * COMPUTER SCIENCE DEPARTMENT *
- * CITY UNIVERSITY OF NEW YORK. *
- * INTERNET ADDRESS: PVJQC@CUNYVM.CUNY.EDU, *
- * BITNET ADDRESS : PRASHANT@QCVAXA.BITNET *
- *********************************************************
-