home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!newsstand.cit.cornell.edu!theq.cit.cornell.edu!R.Beloin
- From: Ron Beloin <R.Beloin@cornell.edu>
- Newsgroups: comp.sys.mac.hardware
- Subject: Setting SCSI id on Conner 40, maybe drive light too
- Date: 23 Jan 1993 21:15:09 GMT
- Organization: Boyce Thompson Inst.
- Lines: 14
- Sender: rmb1@cornell.edu (Verified)
- Distribution: world
- Message-ID: <1jscgtINNibn@newsstand.cit.cornell.edu>
- NNTP-Posting-Host: theq.cit.cornell.edu
- X-UserAgent: Nuntius v1.1.1d12
- X-XXMessage-ID: <A7872078BF010E56@theq.cit.cornell.edu>
- X-XXDate: Sat, 23 Jan 93 21:19:04 GMT
-
- Hello hardware mavens,
- I transferred a Conner 40 from an si to an old MacBotton case, but wasn't
- sure which pins controlled scsi addressing. Can anyone give me a tour
- of the various pins on this drive? There are four pairs labeled E1-E4, as
- I recall, and also a jack near the edge of the circuit board that looks
- like
- it might accept a plug from a scsi changing switch (which the Macbot has).
- Right now it's working fine on a plus, but at scsi 0.
-
- Thanks loads!
-
- Ron Beloin
- Boyce Thompson Inst. for Plant Research
- R.Beloin@cornell.edu
-