home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.hardware
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!uwm.edu!linac!att!att!dptg!ulysses!allegra!princeton!dnwalkerkip2.princeton.edu!gmkizer
- From: Geoff M. Kizer <gmkizer@phoenix.princeton.edu>
- Subject: Mac 512kE monitor problems....
- Message-ID: <1993Jan20.034321.7127@Princeton.EDU>
- X-Xxmessage-Id: <A782347F83016802@dnwalkerkip2.princeton.edu>
- Originator: news@nimaster
- X-Xxdate: Tue, 19 Jan 93 03:43:11 GMT
- Sender: news@Princeton.EDU (USENET News System)
- Nntp-Posting-Host: dnwalkerkip2.princeton.edu
- Organization: Princeton University, Class of '93
- X-Useragent: Nuntius v1.1.1d17
- Date: Wed, 20 Jan 1993 03:43:21 GMT
- Lines: 15
-
- I'm trying to repair a Mac512kE with intermittent monitor problems.
-
- After the Mac is on for a few minutes, the screen blanks out.
-
- The owner noticed that a few hits to the side sometimes brings the
- display up temporarily.
-
- It seems that the solder joints check out -- any suggestions about where
- I should look for the problem? Is there a typical reason for the mac
- internal monitors to fail?
-
- Thanks.
-
- -- Ken Stineman
- (stineman@phoenix.princeton.edu)
-