home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!ferkel.ucsb.edu!taco!gatech!swrinde!cs.utexas.edu!usc!howland.reston.ans.net!bogus.sura.net!darwin.sura.net!sgiblab!sgigate!sgi!cdp!dantz
- From: Dantz Development Corporation <dantz@igc.apc.org>
- Newsgroups: comp.sys.mac.apps
- Date: 26 Jan 93 10:35 PST
- Subject: Re: Retrospect
- Sender: Notesfile to Usenet Gateway <notes@igc.apc.org>
- Message-ID: <1533900026@igc.apc.org>
- References: <C17JIz.Bpu@trc.amoco.com>
- Nf-ID: #R:C17JIz.Bpu@trc.amoco.com:-1739107900:cdp:1533900026:000:807
- Nf-From: cdp.UUCP!dantz Jan 26 10:35:00 1993
- Lines: 31
-
-
-
- Mary Ann:
-
- Make sure that you check "Install Startup INIT" in the Calendar window of
- Retrospect.
-
- Also, check the log to see if Retrospect "thinks" it shut down. The log will
- either say "Shut Down at ..." or "Quit at ..." as the last operation of the
- night.
-
- If it says Shut down, and you have the startup INIT installed, and it still does
- not work, try this:
-
- throw out your startup init (Retro.Startup), restart, launch Retrospect, go to
- Calendar, check Install Startup INIT again, then quit, and restart. This
- re-installs it from scratch, and sometimes this helps.
-
- If you need more help, contact our technical support at
- dantz.tech@appplelink.apple.com or call our tech support line at 510/849-0372.
-
- Best regards,
-
- Walt Hays
- Dantz
-
- CIS: 73367,2416
- Link: D0011
- Phone: 510/849-0293 x 261
-
-
-