home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.apps
- Path: sparky!uunet!ukma!netsys!decwrl!netcomsv!netcomsv!ncselxsi!fisher
- From: fisher@ncselxsi.uucp (Chuck Fisher)
- Subject: Re: ATM 3.0 & Suitcase 2.1.1 Conflict
- Message-ID: <1993Jan27.232010.7201@ncselxsi.uucp>
- Organization: National Computer Systems, San Jose, CA 95131
- References: <ARIE.93Jan27135658@quip.eecs.umich.edu>
- Date: Wed, 27 Jan 1993 23:20:10 GMT
- Lines: 22
-
- In article <ARIE.93Jan27135658@quip.eecs.umich.edu> arie@eecs.umich.edu writes:
- >I found a strange incompatibility between Adobe Type Manager (ATM) version
- >3.0 and Suitcase version 2.1.2 and I wonder if it is a known problem.
- >I installed the two on a PowerBook 160 on top of a clean out of the box
- >installation of System 7.1 using the customized software installation for
- >the PowerBook 160. The PB would stop during the startup process after
- >loading ATM and would display a blank screen (no messages, no errors,
- >no crashes). When I tried to load each of the two, either ATM or Suitcase,
- >the startup process finished and all was well. This happened even when
- >Suitcase wasn't opening any suitcases. Finally I changed the loading
- >order having ATM load before Suitcase and they both worked together.
- >
- >Did this happen to anyone else and is there a fix other than changing
- >the order?
-
- That's right Suitcase, must be loaded after ATM, this a known
- problem.
-
- --
- Chuck Fisher (800) 359-7997 Work
- ncselxsi system administrator (415) 964-2819 Home
- uucp: ...!netcom!ncselxsi!fisher
-