home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!mcsun!sunic!liuida!curofix!c92caren
- From: c92caren@IDA.LiU.SE (Lost-in-BitBucket(tm))
- Subject: Re: hardware hack
- In-Reply-To: Jonathan.Benson@f106.n633.z3.fidonet.org's message of Wed, 20 Jan 1993 10: 07:08
- Message-ID: <C92CAREN.93Jan24212057@styr2.IDA.LiU.SE>
- Sender: news@ida.liu.se
- Organization: CIS Dept, University of Linkoping, Sweden
- References: <727915799.AA04074@csource.oz.au>
- Date: Sun, 24 Jan 1993 20:20:59 GMT
- Lines: 22
-
- In article <727915799.AA04074@csource.oz.au> Jonathan.Benson@f106.n633.z3.fidonet.org (Jonathan Benson) writes:
-
- > Hi
-
- > I> My friend and I installed a switch on my 500 to let me switch between
- > I> half a meg and a full meg chip ram. In full meg mode it has problems.
-
- > Did you make sure to keep those wires SHORT, as if they're too long, I
- > believe this may cause problems. Hope this helps.
-
- One other thing, in order for the amiga to use the extra half meg of
- chipmem, you have to switch the x-mem off (!), because otherwise
- AmyDOS will believe that there is BOTH 1M chipmem and 1/2M slowmem at
- the same time, and the power led will flash all the time...
- --
- +----------------------------------------------------+ ___
- |Calle Englund | ////
- |CompSci Student @ Linkoping University of Technology| ////
- |Email: c92caren@und.ida.liu.se _|_ ////\
- | \\\\ ////\ \
- |00101011 or 11010100 ? \\\X///--\ \MIGA
- +----------------------------------------------------+\XXX/ \ \
-