home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!ogicse!decwrl!waikato.ac.nz!canterbury.ac.nz!chem.canterbury.ac.nz!davis
- From: davis@chem.canterbury.ac.nz (John Davis)
- Newsgroups: comp.periphs.scsi
- Subject: Re: QIC-02 <--> SCSI bridge boards?
- Message-ID: <C1DnnD.2DM@cantua.canterbury.ac.nz>
- Date: 24 Jan 93 21:28:25 GMT
- Article-I.D.: cantua.C1DnnD.2DM
- References: <1009324.25088.5753@kcbbs.gen.nz>
- Reply-To: davis@chem.canterbury.ac.nz
- Organization: Chem Dept, Uni of Canty, Chch, New Zealand
- Lines: 23
- Nntp-Posting-Host: chemrs1.canterbury.ac.nz
- X-Newsreader: TIN [version 1.1 PL7]
-
- David Dix (dgd@kcbbs.gen.nz) wrote:
-
- > I don't know of any other ESDI<->SCSI bridge controllers
-
- there's also the Emulex md21 (esdi-scsi, supports two drives), someone
- else mentioned the md24 which is also esdi-scsi, but meant to support
- up to 4 drives
-
- > the 4520A
- > can apparently connect two ESDI drives but I have never been able to
- > figure out how this works as simply connecting a second esdi drive
- > (I tried a 150meg NEC esdi) does nothing - ie the 1542b did not
- > recognise that the NEC was connected to the 4520.
-
- on the md21 the first drive appears as lun 0, the 2nd as lun 1 - could
- well be the same as the adaptec. If your host adaptor doesn't support
- luns you could have problems accessing the 2nd drive.
-
- --
- -----------------------------------------------------------------------------
- | o John Davis davis@chem.canterbury.ac.nz phone NZ+3642-421 o |
- | o (Depart)mental Programmer,Chem Dept, Univ of Canterbury, Chch, NZ o |
- | o "I do not fear computers, I fear the lack of them" - Isaac Asimov o |
-