home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.graphics.animation
- Path: sparky!uunet!wupost!news.ecn.bgu.edu!mp.cs.niu.edu!linac!uwm.edu!zaphod.mps.ohio-state.edu!howland.reston.ans.net!bogus.sura.net!udel!gatech!purdue!yuma!yuma.ACNS.ColoState.EDU!johnc
- From: johnc@yuma.ACNS.ColoState.EDU (John Cooley)
- Subject: Re: Need expert advice on VCR choice!
- Summary: You probably can't afford what you want
- Message-ID: <Jan26.235812.46491@yuma.ACNS.ColoState.EDU>
- Sender: John Cooley
- Date: Tue, 26 Jan 1993 23:58:12 GMT
- References: <C12MAI.6Ls@news.cso.uiuc.edu>
- Nntp-Posting-Host: yuma.acns.colostate.edu
- Organization: Colorado State University, Fort Collins, CO 80523
- Followup-To: comp.graphics.animation
- Lines: 59
-
- In article <C12MAI.6Ls@news.cso.uiuc.edu> jas37876@uxa.cso.uiuc.edu (John A. Slagel) writes:
- > I need a VCR with these qualities:
-
- > 1. Can be controlled by IBM PC, either serial or otherwise.
- > 2. Needs SVHS capability... can be only B&W if it makes a difference.
- > 3. Needs to be able to record a single frame, and tell the
- > computer what the frame number was so that we can synchronize
- > the picture with a label.
- > 4. Needs to be able to record 5-7 random frames in a second.
-
- > The reason I need this is because I would like to drive 30-50 mph
- > down the road, have a computer recording distance, and every 10 ft
- > it would have the VCR record 1 frame, and the computer would record
- > the frame number and distance... That way, if I want to see a shot
- > of 3754 feet past the starting point, I would know exactly
- > what frame to go to... Hopefully, even be able to have the computer
- > tell the VCR "Go to frame 53254".
-
- > Is this possible, and what VCR should I buy?
-
- A rather special problem, indeed! You forgot to specify that the whole
- set-up needs to be vehicle mounted and, therefore, battery powered. I
- will be surprised if you find anything.
-
- In general, a number of decks available from Sony, JVC and Panasonic
- satisfy requirement number 1. As far as I know, none of them are
- battery powered.
-
- Most of these decks are S-VHS. Sony makes remotely controllable Hi8 decks.
- They are all color.
-
- For number 3, you need time code, which doesn't label the frames in exactly
- the way you had in mind, but it does uniquely identify each frame for later
- access. The algorithm mapping time code to your distance wouldn't be hard
- if you could get number 4, but on a tape device, achieving number 4 is
- unlikely.
-
- Number 4 is the sticky one. A deck with an internal or external animation
- controller needs to preroll for each recording sequence, which, for you, is
- each frame you shoot. This takes several seconds, so you aren't going to get
- 5-7 frames per second. A slightly different breed, a time-lapse deck, does
- not need preroll, but most of them are built for security use and lack either
- time code or RS232 control or both. And they don't go fast enough to do
- 5-7 frames per second, at least not under arbitrary remote control. Tape
- motion is _slow_! Decks run at 30 frames per second or they run, at best, at
- one frame per several seconds.
-
- The only device which _might_ be able to record 5-7 frames per second under
- remote control is a laser video disc, since no preroll is required. And I'm
- not at all sure that even one of these would be fast enough. And I think
- they all require AC power. And the cheapest one on the market is still well
- over $10,000. But they do employ either time code or the frame numbering
- you have in mind.
-
- I think a laserdisc is your only chance. If you want to forget about the
- every 10 feet business and simply use time lapse, many cameras have time
- lapse built in. I suspect that would eliminate the point of your work, though.
-
- John Cooley
-