home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: sci.materials
- Path: sparky!uunet!wupost!udel!princeton!phoenix.Princeton.EDU!gjmelden
- From: gjmelden@phoenix.Princeton.EDU (Gregory J. Melden)
- Subject: Re: Cleaning Calcium chips
- Message-ID: <1993Jan9.191208.1187@Princeton.EDU>
- Originator: news@nimaster
- Sender: news@Princeton.EDU (USENET News System)
- Nntp-Posting-Host: phoenix.princeton.edu
- Organization: Princeton University
- References: <C0K42H.C75@max.physics.sunysb.edu>
- Date: Sat, 9 Jan 1993 19:12:08 GMT
- Lines: 23
-
- In article <C0K42H.C75@max.physics.sunysb.edu> danube@max.physics.sunysb.edu writes:
- > I have some chips of Calcium that are badly oxidized. I am wondering
- >if there is a simple way to clean them. I put them in a plastic bottle
- >with N2 gas and sealed it for storage. I noticed that if I shake the
- >bottle a lot, the oxide rubs off a bit. I suppose I could put glass chips
- >in the bottle and shake for a day. Then I could take the Ca chips out in
- >a glove box.
- > Any better Ideas? Also, how can I store things like Ca, Na, K, and Rb
- >without oil? Is Carbon-tetrachloride better? I need to put the chips in
- >a high vacuum system and I don't want the oil around. I assume things like
- >C-tet evaporate more easily.
- > Danube
-
-
- Under no circumstance should you allow an alkali metal to contact any
- halogenated solvent. T. L. Davis (The Chemistry of Powder and
- Explosives, p. 402) describes the exciting reaction of sodium with
- chlorform (CHCl_3); it is bound to inspire confidence if repeated in
- your lab. Even with alkali earths, these solvents should not be
- assumed to be chemically inert. You might consider rinsing the
- oil off using a light hydrocarbon, such as hexane or cyclohexane
- (--after checking with someone knowledgable (not me!)).
-
-