home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1993 #1 / NN_1993_1.iso / spool / sci / electron / 22252 < prev    next >
Encoding:
Internet Message Format  |  1993-01-08  |  2.1 KB

  1. Xref: sparky sci.electronics:22252 rec.audio.pro:2717
  2. Path: sparky!uunet!usc!sol.ctr.columbia.edu!ucselx!crash!hale!system
  3. From: system@hale.cts.com (System Administration)
  4. Newsgroups: sci.electronics,rec.audio.pro
  5. Subject: Re: Question: What to lubricate plastic pots with?
  6. Message-ID: <VP32wB2w165w@hale.cts.com>
  7. Date: Fri, 08 Jan 93 03:21:06 PST
  8. References: <1993Jan7.193439.2295@umr.edu>
  9. Organization: Hale Telecommunications Inc.
  10. Lines: 35
  11.  
  12. tome@cs.umr.edu (Tom Erb) writes:
  13.  
  14. > I know, it's really a clause in the subject line, but I think it gets the
  15. > point across. 
  16. > I maintain a small FM radio station, and we have many conductive plastic 
  17. > potentiometers in our mixing boards. These things are fairly expensive.
  18. > They get noisy after a while, but if I take them apart and clean/lubricate
  19. > them, they never feel nearly as smooth as they did before. I've tried using
  20. > "Big Bath" from ECG, and some other chemical from ECG that said "Cleans and
  21. > lubricates potentiometers." I haven't taken apart any of the expensive slide
  22. > pots yet as they haven't caused any problems, but the rotary pots have.
  23. > Reply by posting or email, I'll post a summary of any emailed responses.
  24.  
  25.  
  26. Try cleaning them as usual and then lubericating with Breakfree CLP,
  27. make sure it's the CLP and not regular Breakfree.  It's teflon in
  28. suspension and after the recomended 2 hour curing time (If you can't have 
  29. the board down that long, you can use it immediately) it leaves a
  30. nice teflon residue that doesn't seem to conduct (no shorting pots.)
  31.  
  32. See your local gun shop for this stuff, better bicycle shops may also
  33. have it.  Regular Breakfree works also, but is more like a light oil with 
  34. teflon in suspension and it doesn't cure.
  35.  
  36. It should be safe for plastic pots, I use it in my slides with no 
  37. problems, as well as my firearms.
  38.  
  39.  
  40. Hale Telecommunications Inc.        Public Access Internet Site (hale.cts.com)
  41. Owned by a happily armed            (619)/660-6734 V.32bis                
  42. conservative republician.           NYC has gun control.                       
  43.                 
  44. -----   Magic Johnson Knows How To Dribble More Than Just A Basketball!   -----
  45.