home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1993 #1 / NN_1993_1.iso / spool / rec / models / rc / 5347 < prev    next >
Encoding:
Internet Message Format  |  1993-01-06  |  808 b 

  1. Path: sparky!uunet!olivea!charnel!rat!usc!cs.utexas.edu!bcm!aio!dallas!careyb
  2. From: careyb@dallas.jsc.nasa.gov (Brian Carey 283-4181)
  3. Newsgroups: rec.models.rc
  4. Subject: What is a ferite bead?
  5. Message-ID: <1993Jan6.205946.10039@aio.jsc.nasa.gov>
  6. Date: 6 Jan 93 20:59:46 GMT
  7. Sender: careyb@dallas (Brian Carey 283-4181)
  8. Organization: MDSSC
  9. Lines: 9
  10.  
  11.  
  12. What is a ferite bead? The one talked about below.
  13.  
  14. The "Y" harness might be acting like an antenna and causing interference
  15. with the receiver.  I have had this problem and fixed it by running the base
  16. of the "Y" cable through a ferite bead (one turn) to choke off the RF. This
  17. worked with an airtronics receiver.  When I install servos in the wings of
  18. my gliders I go ahead and put the ferrite bead in every installation and
  19. have not had any problems since.
  20.