home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!darwin.sura.net!lhc!adm!news
- From: mcdonald@afwlmvax.aedc
- Newsgroups: comp.sys.sgi.misc
- Subject: gnuplot 3.2 on 8bit indigo?
- Message-ID: <34975@adm.brl.mil>
- Date: 12 Jan 93 15:05:09 GMT
- Sender: news@adm.brl.mil
- Lines: 36
-
- Here at AEDC we use gnuplot on several different platforms. It has performed
- great on all platforms thus far, until we tried to use it on an Indigo with
- 8bit graphics. I have compiled both the IRIS4D and the X11 versions and both
- have the same actions. The plots seem to work fine with the exception of the
- axes not displaying on either the X11 or IRIS4D version. Anyone got gnuplot
- running on an 8bit Indigo? If so, what changes did you have to make?
-
- Here is my hinv listing:
- 1 33 MHZ IP12 Processor
- FPU: MIPS R2010A/R3010 VLSI Floating Point Chip Revision: 4.0
- CPU: MIPS R2000A/R3000 Processor Chip Revision: 3.0
- On-board serial ports: 2
- Data cache size: 32 Kbytes
- Instruction cache size: 32 Kbytes
- Main memory size: 16 Mbytes
- Integral Ethernet: ec0, version 0
- CDROM: unit 4 on SCSI controller 0
- Tape drive: unit 3 on SCSI controller 0: DAT
- Disk drive / removable media: unit 2 on SCSI controller 0: 720K/1.44M floppy
- Disk drive: unit 1 on SCSI controller 0
- Integral SCSI controller 0: Version WD33C93B, revision C
- Iris Audio Processor: revision 10
- Graphics board: LG1
-
- Thanks for any info.
-
- ____________________________________________________________________________
- \____________________________________________________________________________
- \_ Kenneth M. McDonald \_ \_
- \_ Systems Programmer \_ Voice (615) 454-3413 \_
- \_ Arnold Engineering Development Center \_ Fax (615) 454-6171 \_
- \_ EAF Bldg * 1103 Avenue B \_ mcdonald@aedc-vax.af.mil \_
- \_ Arnold AFB, TN 37389-1200 \_ \_
- \________________________________________\_________________________________\_
- \____________________________________________________________________________
-
-