home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!crdgw1!newsun!novell.com!keith
- From: keith@novell.com (Keith Brown)
- Newsgroups: comp.sys.novell
- Subject: Re: Windows for Workgroups and ODI?
- Message-ID: <keith.11.0@novell.com>
- Date: 12 Jan 93 00:03:39 GMT
- References: <C0ps5B.CAA@world.std.com>
- Sender: news@novell.com (The Netnews Manager)
- Organization: Connectivity Products Division, Novell Inc.
- Lines: 51
- Nntp-Posting-Host: keith2.sjf.novell.com
-
- In article <C0ps5B.CAA@world.std.com> nectar@world.std.com (Jacques A Vidrine) writes:
- >Ok, I have ODINSUP.
-
- Well, make sure you have the latest one out of DOSUP6.ZIP.
-
- >I need to run Windows for Workgroups using this so that I can use LAN
- >Workplace for DOS concurrently with WfWg. I basically have the following:
- >
- >CONFIG.SYS:
- >DEVICE=protman.dos
- >DEVICE=workgrp.sys
- >DEVICE=msipx.sys
-
- You must understand that this is coming from someone who, to the best of
- his knowledge, has never been in the same building as a copy of W4W but....
- I would take a guess that MSIPX.SYS is something to do with Microsofts IPX
- over NDIS effort? If this is the case, I'd blow away the above
- 'device=msipx.sys' line and start using the ODI based IPX to get NetWare
- connectivity. Then:
-
- >AUTOEXEC.BAT:
- >LSL
- >TCTOKSH ; Thomas-Conrad MLID v2.00
- >ODINSUP
- >NET START
- >MSIPX
- >NETX
-
- Would become:
-
- LSL
- TCTOKSH
- ODINSUP (for the benefit of the NDIS based W4W)
- IPXODI (IPX for ODI drivers)
- {B}NETX
- TCPIP (LAN WorkPlace ODI based TCP/IP stack)
- NET START (Now start your W4W stuff to sit on ODINSUP)
-
- I'm also assuming W4W runs over NDIS 2.0 and doesn't require some new
- incarnation of the NDIS spec that ODINSUP doesn't support yet.
-
- Keith
-
-
-
-
-
- -
- Keith Brown Phone: 408-473-8308
- Novell San Jose Development Center Fax: 408-473-8990
- 2180 Fortune Drive, San Jose, CA 95131 Net: keith@sjf.novell.COM
-