home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!portal!cup.portal.com!alanh
- From: alanh@cup.portal.com (Alan E Hattman)
- Newsgroups: comp.sys.mac.hardware
- Subject: Cursor Problem with Mac+
- Message-ID: <73086@cup.portal.com>
- Date: Thu, 7 Jan 93 08:24:17 PST
- Organization: The Portal System (TM)
- Distribution: usa
- Lines: 19
-
- My Mac+ must know I've ordered its replacement. In the last couple of weeks
- my mac has developed a weird problem. When I go to click on a button or
- pull down a menu the cursor jumps to the right, sometimes as little as a 1/4
- of an inch, sometimes as much as 2 inches. It doesn't matter if all the
- inits are turned on or not. I've also replaced the system software and no
- difference. Other problem some of the control panel settings clear
- themselves. They are cursor blinking rate, mouse click rate and sound volume
- I'll set them and a little later on they clear themselves. I don't mean
- set themselves to a different setting. They just zero themselves out.
-
- This will happen when the machine is on. All other control panel settings
- are fine.
- Any suggestions would be greatly appreciated as my new Mac won't be here
- for at least another 4 weeks and I have a project which needs to be finished
- in the next two weeks.
-
- Thanks!
-
- Alan
-