home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!cs.utexas.edu!zaphod.mps.ohio-state.edu!caen!uvaarpa!darwin.sura.net!opusc!usceast!pritchet
- From: pritchet@cs.scarolina.edu (Ronald W. Pritchett)
- Subject: can't access (new) 2nd SCSI drive
- Message-ID: <pritchet.726041327@ash.cs.scarolina.edu>
- Sender: usenet@usceast.cs.scarolina.edu (USENET News System)
- Organization: USC Department of Computer Science
- Distribution: comp
- Date: 3 Jan 93 06:08:47 GMT
- Lines: 36
-
- I need a little SCSI help please...
-
- here's my setup:
-
- 1st HD: 110 ESDI - Ulrastor controler, controls FDs too
- 2ns HD: 210 SCSI - Futute Domain cont.
- 3rd HD: 340 SCSI ^^^^^
-
- I can only access the 2nd SCSI drive thru SuperStor 6.0.3 (which I used to
- create DOS partitions). What gives?
-
- I've tried most combinations of terminators vs no terminators. The current
- setup is:
-
- SCSI card - no term
- 1st SCSI - no term - ID 1
- 2nd SCSI - term - ID 2
-
- The card is set @ ID 7 and recognizes noth SCSI drives on boot-up. Which
- ever drive is first in the ID chain is the only one accessible.
-
- What now?
-
-
- Ron
-
-
- ==============================================================================
- | 'They say I'm lazy, but |
- | it takes all my time... |
- | Life's been good to me so far!' -Joe Walsh |
- |----------------------------------------------------------------------------|
- | Ron Pritchett Internet: pritchet@ash.cs.scarolina.edu |
- | FidoNet: Ron Pritchett @ 1:376/74.0 |
- ==============================================================================
-
-