home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!gatech!usenet.ins.cwru.edu!agate!spool.mu.edu!enterpoop.mit.edu!ira.uka.de!math.fu-berlin.de!news.netmbx.de!Germany.EU.net!mcsun!sunic!seunet!kullmar!piraya!overdose!Magnus_Thelander
- From: Magnus_Thelander@p18.atb.bbs.bad.se (Magnus Thelander)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: IBM joystick <-> Amiga??
- Message-ID: <OD.10badnet.ftnOA92-901-302p18_4488D097@piraya.bad.se>
- Date: Thu, 7 Jan 93 06:33:10 +0000
- References: <7l8es*-W0@video1.han.de>
- Sender: BadNet@piraya.bad.se
- Reply-To: Magnus_Thelander@p18.atb.bbs.bad.se (Magnus Thelander)
- Distribution: world
- Organization: The final frontier, Lund, Sweden
- OD-Comment-To: Joachim_Gothe
- Lines: 15
-
- In a message of Friday the 01 January 21:23:00, Joachim Gothe wrote:
-
- JG> There MUST be a .17 microfarad capacitor from each of the Pot-X
- JG> and Pot-Y pins to ground. -Thank you Randell Jesup
- JG> (jesup@cbmvax.commodore.com)-
-
- You may want to put linear 0-470 kOhm potentiometers on the Pot-X
- and Pot-Y wires too. They will come in handy, when the built-in
- calibration of the joystick is insufficient. This is the case with
- e.g. F-19 from MicroProse together with my CH FlightStick.
-
- Yours truly, Magnus
-
- "Things are going great, and they're only getting better!"
- --- VolVoxReply v2.1 b1
-